BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL CYBERPOWER WARRANTY!!!
The CyberPower SM020KAMFA Smart App Online 3-Phase Modular UPS System brings flexibility, space savings, and efficiency to 3-Phase power protection technology. Configurable for N+N system or N+1 power module redundancy, the system can intelligently manage individual modules to achieve higher efficiency. The customizable modular design can be configured as a tower, side-by-side, or integrated within a rack. The high-density, scalable 10kVA/10kW power modules are 2U in height, saving space while providing more options for capacity expansion.
The SM020KAMFA features double-conversion topology for seamless power protection and a pre-installed RMCARD205 for remote management. The user-friendly 7” color touchscreen displays key status indicators at-a-glance. Three-stage Smart Battery Management (SBM) equalizes battery voltages and reduces excessive heat to extend battery life. Plus, hot-swappable power modules, battery and, bypass allow for rapid replacement and minimal impact to system operation. Ideal for high-end data centers, the SM020KAMFA Smart App Online 3-Phase Modular UPS System assures reliable, high-quality AC power and includes a One-Year Limited Warranty.
Specifications
- Brand: CyberPower
- SKU # SM020KAMFA
- Dual Power Inputs: Yes
- Energy Saving: Online ECO Mode Efficiency >97.5%
- Hot Swappable Bypass Module: Yes – Qualified Personnel Only
- Hot Swappable Power Module: Yes – Qualified Personnel Only
- Module Maximum Capacity: 3
- Parallel Expansion (Max. Units): 2
- Power Module Redundancy Capability: Yes
- UPS Topology: Online Double Conversion
- Battery Bus Voltage: Nominal: ±120VDC, one-side range: 120VDC – 132VDC
- Battery Cabinet: Modular External
- Charger Voltage Tolerance: ?1% Float
- Extended Battery Module: BCT3L9N125
- Hot Swappable: Yes
- Hot Swappable Battery Module: Yes – Qualified Personnel Only
- Recharge Power: Default 10% x UPS Power
- Recharge Power (Selectable): 1 % – 20 %
- Replacement Battery Cartridge Quantity: 6
- Ripple Current: ?5% C10
- Ripple Voltage: ?1% VDC Float
- Temperature Compensation (Per Cell): -3 mV/°C
- Backfeed Protection: Yes
- Bypass Input Voltage Range: -20 % – 15 %
- Bypass Input Voltage Range (Selectable): Lower limit: -10%, -20%, -30%, -40%, Higher limit: +10%, +15%, +20%, +25%
- Bypass Overload Protection: 110% – 130% Load for 5 Min, 130% – 150% Load for 1 Min, >150% Load for 300ms
- Bypass Rated Current: 55.6A@ 208V
- Bypass frequency tolerance (Default): ±10%
- Bypass frequency tolerance (Selectable): ±2.5%, ±5%, ±10%, ±20%
- Bypass to Inverter Switch Time: Synchronized switch: ?1ms
- Current rating of bypass neutral cable (A): 1.7 x Input Rated Current
- Input Connector: Hardwire (L1, L2, L3, N, G)
- Input Frequency Range: 40 Hz – 70 Hz
- Input Power Factor: 0.99
- Input Voltage: 208/120V 220/127V
- Input Voltage Range: 187 VAC – 260 VAC
- Phase: 3 Phase
- Synchronization-Window: Rated frequency: ±2Hz
- Synchronization-Window (Selectable): ±0.5Hz – ±5Hz
- THDI (%): < 4% (Full Linear Load)
- Automatic Voltage Regulation: ±1 (Balanced Load), ±1.5 (100% Unbalanced Load)
- Bypass: Internal Bypass (Automatic and Manual)
- Crest Factor: 3:1
- Efficiency: 92.5% (Battery Mode), 93% (Normal Mode)
- Harmonic Distortion: < 1.5% at Linear Load, < 6% at Non-Linear Load
- Maintenance Bypass: Yes
- Max Change Rate of Synch Frequency: 1 Hz/s
- Max Change Rate of Synch Frequency (Selectable): 0.1 – 5 Hz/s
- Maximum Capacity (VA): 20000 VA
- Maximum Watts Capacity: 20000 W
- Neutral Current Capability: 170 %
- Non-Linear Load Capability: 100 %
- On AC WaveForm: Sine Wave
- Outlet Type: 1 – Hardwire Terminal Block
- Output Connector: Hardwire (L1, L2, L3, N, G)
- Output Frequency: 50/60 Hz (auto-sensing/configurable)
- Output Power Factor: 1
- Output Voltage: 208/120V 220/127V
- Output Voltage Range: ±5% VAC
- Overload Protection: 110% Load for 10 min, 125% Load for 1 min, 150% Load for 30 sec, >150% Load for 200 ms
- Short Circuit Protection: 300% – 200ms
- Synchronization Window (Rated ): ±2Hz
- Synchronization Window (Selectable): ±1Hz – ±5Hz
- Transient Voltage Response: ±5%
- Typical Transfer Time: 0 ms
- VA: 20000 VA
- Watts: 20000 W
- Dry Contacts: Yes
- Emergency Power Off (EPO) Port: Yes
- LCD: Multifunction LCD, Touch Screen, Color
- LED Indicators: Rectifier, Battery Mode, Bypass Mode, Inverter, Load, Status
- SNMP / HTTP Remote Monitoring: Yes – RMCARD205 pre-installed
- Serial Port: 1 RS232, 1 RS485
- Software (Free Download): PowerPanel Business
- Color: Black
- Form Factor: Modular
- Material of Construction: Metal
- Mounting Hardware: Yes
- Rack Height: 11U
- Physical Dimensions – (WxHxD) (in): 19.1 x 23.9 x 30.5 (in)
- Physical Weight (lb): 133.8
- Shipping – Weight (lb): 202.75
- Shipping Dimensions – (WxHxD) (in): 24.88 x 31 x 40.25 (in)
- Power Module – Rack Units: 11U
- Audible noise at 1m from surface of unit: 56 dBA
- Ingress Protection: IP20
- Maximum Air Exchange: 3.02 m3 /min
- Online Thermal Dissipation: 5732.16 BTU/hr
- Operating Elevation: 0 – 10000 ft (0 – 3048 m)
- Operating Elevation Note: At ?1000m above sea level, de-rate power by 1% per 100m between 1000m and 3048m
- Operating Relative Humidity: 0 – 95 % (non-condensing)
- Operating Temperature: 32 – 104 °F (0 – 40 °C)
- Operating Temperature Note: Battery life is halved for every 10°C increase above 20°C
- Storage Battery Temperature Note: Optimum battery storage between -15°C and 20°C
- Storage Relative Humidity: 0 – 95% (non-condensing)
- Storage Temperature: -4 – 158 °F (-20 – 70 °C)
- Environmental: RoHS Compliant
- Safety: cTUVus, UL1778, CSA C22.2 No. 107.3-14, CFR 47 FCC Part 15, Subpart B, Class A, IEC62040-2
- Product Warranty: 1 Year Limited Warranty