BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL CISCO LIMITED LIFETIME WARRANTY!!!
The Cisco Catalyst 3560 Series switches is a line of fixed configuration, enterprise-class, IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) switches in Fast Ethernet configurations that provide availability, security, and quality of service (QoS) to enhance network operations. The Catalyst 3560 is an ideal access layer switch for small enterprise wiring closets or branch office environments that are using their LAN infrastructure for the deployment of new products and applications such as IP telephones, wireless access points, video surveillance, building management systems, and remote video kiosks. Customers can deploy network-wide intelligent services, such as advanced QoS, rate limiting, access control lists, multicast management, and high-performance IP routing - while maintaining the simplicity of traditional LAN switching. Embedded in the Catalyst 3560 is the Cisco Cluster Management Suite (CMS) Software, which allows users to simultaneously configure and troubleshoot multiple Cisco Catalyst desktop switches using a standard Web browser. Cisco CMS Software provides configuration wizards that greatly simplify the implementation of converged networks and intelligent network services. The Catalyst 3560 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones and Cisco Aironet wireless LAN access points, as well as any IEEE 802.3af-compliant end device. Power over Ethernet removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling that would otherwise be necessary in IP phone and wireless LAN deployments. Maximum power availability for a converged voice and data network is attainable when a Catalyst 3560 Switch is combined with the Cisco Redundant Power System 675 (RPS 675) for seamless protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages.
General
- Device Type : Switch - 48 ports - L3 - Managed
- Enclosure Type : Rack-mountable - 1U
- Ports : 48 x 10/100 + 4 x SFP
- Power Over Ethernet (PoE) : Yes
- MAC Address Table Size : 12K entries
- Routing Protocol : OSPF, IGRP, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPF for IPv6, OSPFv3, policy-based routing (PBR), RIPng
- Remote Management Protocol : SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2
- Authentication Method : Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
- Features : Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
- Compliant Standards : IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
- RAM : 128 MB
- Flash Memory : 16 MB Flash
- Status Indicators : Port status, port transmission speed, port duplex mode, power, link OK, system
- Interfaces : 48 x 10Base-T/100Base-TX - RJ-45 - PoE ¦ 1 x console - RJ-45 - management ¦ 4 x SFP (mini-GBIC)
- Power Device : Power supply - internal
- Voltage Required : AC 120/230 V ( 50/60 Hz )
- Power Consumption Operational : 483 Watt
- Features : Redundant Power System (RPS) connector
- Width : 44.5 cm
- Depth : 37.8 cm
- Height : 4.4 cm
- Weight : 6 kg
- MTBF : 173,500 hour(s)
- Compliant Standards : CE, FCC Class A certified, TUV GS, GOST, BSMI CNS 13438 Class A, CISPR 24, cUL, NOM, VCCI Class A ITE, EN55024, EN55022 Class A, CISPR 22, CSA 22.2 No. 60950, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, EMC, FCC Part 15, MIC, UL 60950-1, IEC 60950-1, EN 60950-1
- Min Operating Temperature : 0 °C
- Max Operating Temperature : 45 °C
- Humidity Range Operating : 10 - 85%
- Max Altitude Operating : 3 km
Features : Full duplex capability, layer 3 switching, layer 2 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
Cisco Part Number : WS-C3560-48PS-E
UPC : 00746320901145, 05051749143782