BRAND NEW FACTORY SEALED & RETAIL BOXED WITH THE FULL NETGEAR WARRANTY!!!
Introducing two new, preconfigured M4500 100GE switches: M4500-32C and M4500-48XF8C The trend of moving matrix switching into the Ethernet network is accelerating and a new class of switches has come to market. Combining the configurability of a matrix switch with the power and scalability of Ethernet, they support hundreds of AV over IP endpoints, at a price point dramatically lower than comparable matrix switches. The Layer 3 feature set includes static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM. Removing the need for PIM routing, these new switches offer IGMP+ and greatly simplify system architectures with the same well-known IGMP techniques across the entire AV over IP network while still operating at Layer 2. Installers opting to use M4500-48FXC switch in their installation will find that it is already preconfigured out of the box. It comes with 48 10G Fiber ports with 8 100G uplink ports with true AV and multicast Zero Touch network configuration. Connect AV over IP encoders and decoders, and power on the switch. It just works! Then use the M4500-32C switch to aggregate the edge switches for a complete set up in large projects up to 320x320 SDVoE (10Gb) devices in a single architecture. Specifications
- Brand: NETGEAR
- SKU: XSM4556-100NAS
- Processor Brand: Intel
- Processor Number: Atom C3558
- Processors Installed: 1
- Memory Technology: DDR3L SDRAM
- RAM Installed: 8 GB
- Form Factor (Hubs & Switches): Rack-mountable
- Jumbo Frame Support: 9KB
- MAC Address Table Size: 32K entries
- Manageable: Yes
- Ports: 48
- Product Type: Switch
- Remote Management: CLI, HTTP, IPv4, IPv6, SNMP, SNMP 1, SNMP 2c, SNMP 3, SSH, TACACS+, Telnet
- Routing Protocol: BGP, BGP-4, CIDR, IGMPv2, IGMPv3, MLDv2, OSPFv3, PIM-SM, Policy-based routing (PBR), RSTP, STP, VRRPv2
- Subcategory: Network hubs and switches
- Switching Type: 10 Gigabit Ethernet
- Interface Provided: 1 x serial (RS-232) RJ-45, 1 x USB Type A, 48 x 25GBase-X SFP28, 8 x 100GBase-X QSFP28
- Port Quantity: 48
- Port Type: 10 Gigabit SFP28
- Ports Type (2nd): 100 Gigabit QSFP28
- Power Consumption Operational: 394 watt
- Power Provided: 750 watt
- Power Supplies Installed: 2
- Power Supplies Supported: 2
- Redundant Power Supply: Yes
- Redundant Power Supply Supported: 1+1
- Built-in Devices: 128 GB SSD
- Humidity Range Storage: 95% (non-condensing)
- Max Operating Temperature: 122 degree Fahrenheit
- Max Storage Temperature: 158 degree Fahrenheit
- Min Operating Temperature: 32 degree Fahrenheit
- Min Storage Temperature: -4 degree Fahrenheit
- MTBF: 289,052 Hours
- Operating Humidity: 90% (non-condensing)